Last Modified: 11-29-2007 1.6 A
Service Category: Audio/Visual/Telematics Section: Park Assist/Monitoring
Model Year: 2008 Model: Sequoia Doc ID: RM000001PYF00YX
Title: PARK ASSIST / MONITORING: ULTRASONIC SENSOR (for Front Side): REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE FRONT END PANEL LH (w/o Headlight Cleaner System) LIGHTING (EXT): HEADLIGHT ASSEMBLY: REMOVAL (2008 Sequoia)+

2. REMOVE FRONT END PANEL RH (w/o Headlight Cleaner System)

HINT:

Use the same procedure as for the LH side.

3. REMOVE FRONT END PANEL LH (w/ Headlight Cleaner System) LIGHTING (EXT): HEADLIGHT ASSEMBLY: REMOVAL (2008 Sequoia)+

4. REMOVE FRONT END PANEL RH (w/ Headlight Cleaner System)

HINT:

Use the same procedure as for the LH side.

5. REMOVE FRONT BUMPER COVER EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL (2008 Sequoia)+

6. REMOVE NO. 1 ULTRASONIC SENSOR

(a) Disconnect the connector.

(b) While pushing down on the lever with a finger to release the claw, disengage the claw on the other side to remove the ultrasonic sensor.

HINT:

The type of the claws on the top and bottom of the sensor are different. Observe the claws carefully before attempting to removing the sensor.

7. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER

(a) Disengage the 2 claws and remove the ultrasonic sensor retainer from the front bumper.